PRECICUT Milling Machines

Approx. Rs 3 Lakh / PieceGet Latest Price

The Precicut Milling Machine is well known as a “rigid, rugged and reliable” machine. It enjoys a vast user base of over 5000 in India and abroad. Sustained accuracies over a long period, low maintenance and ownership cost have given it the optimal mix to become the preferred brand over the last decade. These machines are normally offered from our factory outlet based in Noida near New Delhi

Specifications:

• Table Sizes 1270 x 254 from 1370 x 254
• Clutchless head
• Rigid and single piece Meehanite Columns
• Rigid humpback type machine body
• Y Z Axis Square Sideways
• X Y Axis “Turcite-B” Coated
• Variable Speed Head
• Unique Modified Step Head Design in 3S
• Better Cutting Performance
• Heavy duty machine body
• 1370 X 254 mm Work Table
• X Y Lead screws Chromed Hardened Varied Speed Head

• Electrical to suit AC supply voltage of 415 V, 3 Phase, 50 HZ
• Spindle forward reverse switch emergency stop
• Draw Bar
• One shot lube system
• Set of service tools
• Operator's manual
• Low voltage electrical panel with E.M. contractors over load relays for all models

Optional Accessories

• Coolant equipment (Std in 4V only)
• Power draw bar
• Digital readout system
• Chip tray
• Horizontal milling attachment
• Power feeds for table saddle knee. Traverses reduce by approx 70mm with power feed.
• Work holding devices such as machine vices with or without swivel base, rotary table, dividing head, angle plates and sine table.
• Cutter holding devices such as end mill holders, collets, stub milling arbors and boring heads

Approx. Rs 50,000 / UnitGet Latest Price

Machine Mate Digital Read Outs are used on ram turret milling machines to overcome the effect of in accuracy arising out of table overhang. The complete digital read out system consists of a display device more popularly known as the counter and linear scales. Linear scales are position transducers that generate digital signals as they sense linear movement. These digital signals are counted by the precise electronics housed in the counter box and displayed as numeric position. Machine Mate DROs have been in active service since the last 17 years providing accurate representation of machine position. They are extremely reliable and affordable and are even though optionally offered ship as standard accessory with most ram turret milling machines supplied by us.

Features

• Consistent and reliable performance
• Compact and elegant space saving design
• Rugged design to adapt to the tough operating environment of the machine shop

Approx. Rs 5,000 / UnitGet Latest Price

The Rotary Table offered by us made of graded cast Iron and precision manufactured bevel gears. The design is rigid and can tale heavy cutting loads and maintain accuracy in machining. The table is provided with the eccentric bush arrangement to facilitate backlash adjustment. It has T-slots to facilitate job clamping. There are many other features provided on the rotary table

Specifications:

• Type: Table
• Machine: Milling Machine
• Processing Type: casting
• Material: Carbon Steel
• Size: Customized

Features

• High strength
• Robust construction
• Ease of function and service

Additional Information:

• Delivery Time: At the time of order confirmation
• Packaging Details: Box

Approx. Rs 5,000 / PieceGet Latest Price

Clamping Kits consists of all essential elements that are used to clamp the work/job on milling machine table. Good quality materials used to make these clamping elements make the clamping kit another favored accessory that goes with our milling machines. They are blackened and thus good for wet machining. They are available in two flavors, 34 pcs per set of 58 pcs per set.

Features

• Long life and form stability
• Resistant to rust due to good blackening
• Supplied in box or with a wall hanging bracket (only for 58 pcs set)

Additional Information:

• Delivery Time: At the time of order confirmation
• Packaging Details: Box

Approx. Rs 5,000 / UnitGet Latest Price

The machine is manufactured with graded cast iron base, accurately machined to provide good parallelism between jaws. It provides repeat clamping accuracy when clamped repeatedly.

Details:

• Max Opening: 78 mm
• Drive Mode: Manual
• Width of Jaw: 78 Mm
• Material: High-Quality Cast Iron

Features

• High Strength
• Repeat clamping accuracy
• Long trouble free service life
• Dove tail sliding guide ways ensure jib less jaw alignment.
• Enclosed thread rolled screw in steel forging nut ensures reliable, maintenance free, durable operations.
• Hardened and ground jaws easily grip.
• Interchangeability of spare parts.

Approx. Rs 50,000 / UnitGet Latest Price

Power feed is used to provide a variable speed electric motor drive on any one of the X or Y axis of the ram turret milling machine. These power feeds are specially designed for ram turret milling machines and deliver high torque and cutting feed for day to day metal cutting operations done on the machine.

This significantly enhances the productivity of the otherwise manually operated ram turret milling machine. This is offered as on optional accessory but is essential for those who wish to focus on relieving the operator from the tedious task of moving the machine during a metal removal operation and allowing him to focus on precision and job planning.

Some of the key features of the power feed are as follows:

Features

• Compact Design
• Reliability
• Ease of operation and service

Additional Information:

• Delivery Time: At the time of order confirmation
• Packaging Details: Box

Approx. Rs 50,000 / UnitGet Latest Price

The Dividing Head is a precision accessory that is able to turn the job about its horizontal or vertical axis in precise angular increments. It is thus used in tool rooms to make polygonal components, gears, splines and milling cutters, etc. The indexing mechanism is housed in a fine-grained precision machined cast iron housing. It normally consists of a precision machine hardened dividing plate, a chuck to hold the job.

Features

• Precise angular incremental movements
• Easy to maintain
• Sustains accuracy over long periods

• Material: Steel
• Type: Dividing Head
• Diameter of the table: 125mm
• Dividing accuracy:60''''